MOUNTING AN ELECTIC RADIATOR FAN

While all electic fans are not created equal, the installation and setup is generally very similar.  First, check what has come with your fan.  if you intend on "core" mounting your fan, you will need radiator zip ties, mounting feet and screws.  Some fans will come with tabs for mounting and others may have the tabs already pre-attached to the unit.

THROUGH THE CORE MOUNTING INSTRUCTIONS:

Attach the mounting tabs to the electric fan.

Position the electric fan against the radiator and mark the spots for mounting. Align the mounting points with the radiator fins avoiding direct alignment with the tubes.(Some applications may have A/C condenser and/or transmission coolers on the front of the radiator. Additional adjustments or modifications may be necessary for installation)

Push on the speed nuts until snug.


WIRING INSTRUCTIONS:

fan wiring:

Attach the red fan motor wire to a 12V positive ingnition controlled source, e.g fuse box.  use a 20 amp inline fuse for each fan

Attach the black fan motor wite to a ground, e.g. negative side of the battery, chassis etc.


Note: Disconnect the battery prior to wiring any product!!